After the installation of the suspended iron remover, these checks need to be done well

After the installation of the suspended iron remover, it does not mean that it can be used normally, and four inspection tasks need to be carried out. The installation of suspended self unloading iron removers is usually carried out by professional personnel on site. After installation, it cannot be directly put into production. The inspection work must be carried out in the following steps.

1. Check if the voltage is normal, the insulation is intact, and the grounding of the iron remover and control cabinet is normal.

2. Check if the electrical components inside the control box are intact and if the wiring terminals are intact.

3. Check whether the height of the suspended iron remover is appropriate, whether the suspension device is secure, and whether the lock is locked properly.

4. Check if the car is moving normally and in the correct direction.

In addition to conducting the above inspections on the suspended iron remover, personnel should also pay attention to correct operation during the installation process. Once installed improperly, it will affect the normal operation of the suspended iron remover, causing serious damage to the equipment and posing serious safety hazards to subsequent production processes.